Disclaimer2017 Infiniti G37 Sedan V6-3.7L Diagnostic and Repair Information # 09-012E Date: 130404
Emissions - EVAP Leak Diagnosis
Classification:
EC09-002e
Reference:
ITB09-012e
Date:
April 4, 2013
EVAP LEAK DTC DIAGNOSIS
This bulletin has been amended to the APPLIED VEHICLES section. Please discard all previous versions of this bulletin.
APPLIED VEHICLES:
2007 - 2013 Infiniti vehicles
SERVICE INFORMATION
Page 341
Page 342
Page 343
Page 344
If one or more DTCs listed below related to EVAP system leaks is found stored in Self Diagnosis use the REPAIR FLOW CHART. Use the EVAP
system diagram for reference.
^ DTCs: P0442 P0455 and P0456
^ This Service Procedure can be used in addition to the procedure(s) outlined in the applicable Service Manual and other bulletins applicable
to specific EVAP leak DTCs when necessary.
^ If a Smoke (Leak Detection) Machine is available and preferred the REPAIR FLOW CHART can still be used. This tool would be used in
place of watching for pressure drop and spraying with soapy water. Refer to the Machine's Operator's Manual for proper use.
CAUTION:
Use Essential Tool J-42909 (sent out to dealers September 1997) or equivalent to pressurize the EVAP system. Do not pressurize over
the amount specified in the applicable Service Manual. Do NOT use shop air pressure.
IMPORTANT NOTE:
If an EVAP system DTC(s) not related to EVAP leaks is/are found stored in Self Diagnosis this bulletin does not apply. Refer to ASIST
and the appropriate Service Manual for diagnostic procedure(s) as needed.
