Wednesday, December 19, 2018

Cooling System - Leaks/Overheating

Infiniti G35x Sedan AWD V6-3.5L (VQ35DE) Technical Service Bulletin # 04-007 Date: 040206



Cooling System - Leaks/Overheating



Classification:



EM04-003



Reference:



ITB04-007



Date:



February 6, 2004



RADIATOR CAP INSPECTION DURING COOLANT SYSTEM SERVICE



APPLIED VEHICLES:



All 1999 and Later Vehicles



IF YOU CONFIRM:



An applied vehicle has any of the following symptoms:



^ Leaking radiator



^ Overheating cooling system



OR



If you removed the radiator cap for any other reason.



ACTION:



208



^ Look for a "swollen" (enlarged) radiator cap gasket. See Figure 1a and 1b.



^ An enlarged radiator cap gasket can cause the cap to not vent properly. This can result in coolant loss and overheating.



^ See the Service Procedure on page two for more details.



PARTS INFORMATION



See the "FAST" parts system for the Radiator Cap applicable to the vehicle you're working on.



SERVICE PROCEDURE



During normal scheduled maintenance or for a vehicle with one of the symptoms listed under IF YOU CONFIRM inspect the Black Rubber Gasket



on the end of the Metal Plunger of the radiator cap. View the Black Rubber Gasket by looking at the bottom side of the radiator cap.



A. The Black Rubber Gasket should be smaller in diameter than the Metal Plunger under it (see Figure 2).



If the Metal Plunger can be seen around the edge of the Black Rubber Gasket and the gasket is clean without any deposits of a waxy residue or



foreign material the gasket is OK.



NOTE:



Make sure you pressure test the radiator cap and confirm it opens and closes at the correct specifications.



209



B. If the Metal Plunger cannot be seen around the edge of the Black Rubber Gasket (see Figure 3) the radiator cap must be replaced.



^ Thoroughly wipe out the radiator filler neck to remove any waxy residue or foreign material.



^ Install a new radiator cap.



C. If the Metal Plunger can be seen around the edge of the Black Rubber Gasket but there are deposits of waxy residue or foreign material on the



gasket or the metal retainer (see Figure 4) the radiator cap must be replaced.



^ Thoroughly wipe out the radiator filler neck to remove any waxy residue or foreign material.



^ Install a new radiator cap.