Instruments - Clock Won't Illuminate With Lights ON

Infiniti G35x Sedan AWD V6-3.5L (VQ35DE) Technical Service Bulletin # 03-065B Date: 060721

Instruments - Clock Won't Illuminate With Lights ON

Classification:

EL03-041b

Reference:

ITB03-065b

Date:

July 21, 2006

CLOCK BULB REPLACEMENT

APPLIED VEHICLES:

2000 - 2001 I30 (CA33)

2002 - 2004 I35 (CA33)

2003 - 2004 G35 (V35 and CV35) Coupe and Sedan

2003 - 2005 FX35 & FX45 (S50)

2002 - 2005 Q45 (F50)

2003 M45 (Y34)

This bulletin amends ITB03-065a. Please discard all paper copies of that bulletin.

IF YOU CONFIRM:

The clock will not illuminate when the lights are turned "ON" (clock bulbs are burned out),

ACTION

Replace the clock bulbs with new ones (see the Parts Information for the correct bulbs).

PARTS INFORMATION

CLAIMS INFORMATION

NOTE:

This is the ONLY approved repair procedure for this incident. A claim to Infiniti for the repair of this incident may be denied if the repair is not

performed exactly as outlined in this bulletin.

306

Submit a Primary Failed Part (PP) line claim using the claims coding table.

SERVICE PROCEDURE

1. Remove the clock from the dash.

^ Refer to the appropriate Service Manual (ESM) section DI or BT for clock removal.

2. Replace the clock bulbs as follows:

A. Refer to picture for the car you are working on.

B. Turn the back of the bulbs counterclockwise about 1/4 turn to unlock them.

C. Pull the old bulbs from the clock.

D. Install the new bulbs and turn them clockwise about 1/4 turn to lock them in place.

3. Reinstall the clock in the dash in reverse order.

4. Set the clock to the correct time.

Body/Interior - L/H or R/H Rear Door Pop/Tick Noise

Disclaimer Infiniti G35x Sedan AWD V6-3.5L (VQ35DE) Technical Service Bulletin # 05-034 Date: 050705

Body/Interior - L/H or R/H Rear Door Pop/Tick Noise

Classification:

BT05-030

Reference:

ITB05-034

Date:

July 5, 2005

2003-2005 G35 SEDAN; NOISE FROM REAR DOOR

WITH WINDOW ALL THE WAY UP

APPLIED VEHICLE: 2003 - 2005 G35 Sedan (V35)

IF YOU CONFIRM

A creak, pop, or ticking noise coming from inside a rear door (left or right) with the window all the way UP,

^ This noise may occur when driving over bumps or rough roads with the window rolled all the way up.

^ If the noise occurs, it will stop when the window is rolled down.

ACTIONS

154

1. Replace the attaching bolts for window regulator-to-window (shown in Figure 1) with the shorter bolts listed in the Parts Information.

^ Refer to section GW in the Electronic Service Manual (ESM) as needed for door disassembly and assembly information.

2. Test drive the vehicle to make sure the noise is gone.

PARTS INFORMATION

CLAIMS INFORMATION

Submit a Primary Failed Part (PP) line using the claims coding shown.

Rear Door Window / Window Regulator

Keyless Systems/TPMS - SIGNAL TECH II(R) Diag. Tool

Infiniti G35x Sedan AWD V6-3.5L (VQ35DE) Technical Service Bulletin # 10-023B Date: 111003

Keyless Systems/TPMS - SIGNAL TECH II(R) Diag. Tool

Classification: WT10-002B

Reference: ITB10-023A

Date: January 6, 2011

SIGNAL TECH II DIAGNOSTIC TOOL

This bulletin has been amended. Notes below and APPLIED VEHICLES have been amended. Please discard previous versions of this bulletin.

APPLIED VEHICLES:

All Infiniti with Tire Pressure Monitor System (TPMS), Remote Keyless Entry, or Intelligent Key.

NOTE:

Failure to update Signal Tech II may lead to misdiagnosis of vehicles built after February 28, 2010.

^ The latest software is available on the CONSULT III PC at: ASIST > Specialty Tools > Signal Tech II.

^ If you should encounter problems updating Signal Tech II, contact Techmate.

^ Future updates will be released as needed. Check ASIST frequently for this information.

SERVICE INFORMATION

If service is required on a vehicle's Tire Pressure Monitor System (TPMS) remote keyless entry or Intelligent Key the Signal Tech II (special tool

J-50190) can be used for diagnostics.

Signal Tech II will quickly:

^ Activate and display TPMS Sensor IDs

^ Display tire pressure reported by the TPMS sensor

^ Read TPMS DTCs and register TPMS IDs

^ Store and print reports for warrantable repairs

^ Check intelligent key relative signal strength

^ Test remote keyless entry relative signal strength

^ Confirm vehicle Intelligent Key antenna relative signal strength output

104

^ Read ENGINE DTCs

Other available information for Signal Tech II:

^ Signal Tech II Quick Start Guide: ASIST > Tools & Equipment> Tool & Equipment Web Page

^ Signal Tech II Users Guide: ASIST > Tools & Equipment> Tools & Equipment Web Page

^ Tool Flyer: ASIST > Tools & Equipment> Tools & Equipment Web Page> Infiniti Essential Tool Flyers

^ Tech Talk Article: ASIST > Tech Support Info> TECH TALK / XTRA> Spring 2010 issue

Navigation System - Intermittently Inoperative

Infiniti G35x Sedan AWD V6-3.5L (VQ35DE) Technical Service Bulletin # 04-042 Date: 040824

Navigation System - Intermittently Inoperative

Classification:

EL04-029

Reference:

ITB04-042

Date:

August 24, 2004

INFINITI; NAVIGATION SYSTEM IS INOPERATIVE

APPLIED VEHICLES:

2003 - 2004 G35 Coupe (CV35)

2003 - 2004 G35 Sedan V35)

2002 - 2004 Q45 (F50)

2003 - 2004 M45 (Y34)

2003 - 2004 FX35/45 (550)

2004 QX56 (JA60)

IF YOU CONFIRM:

The navigation system is inoperative and the display shows "Disc Error", or "DVD-ROM version is not correct"

NOTE:

This incident, if it occurs, may be intermittent.

222

ACTION:

Replace the navigation control unit.

^ Order the replacement unit through the Navigation Exchange Program (via Clarion). Call (800) 347-8933 or Fax the order to (310) 217-4354 or

(310) 217 - 4380.

^ When ordering the replacement unit, you need to give Clarion the navigation control unit's part number. All Applied Vehicles except M45 and

Q45; the part number will begin with 25915-xxxxx.

For M45 and Q45 only; the part number will begin with 28330-xxxxx.

^ For navigation control unit replacement information, refer to section AV in the appropriate Service Manual

CLAIMS INFORMATION

Submit a Primary Failed Part (PP) line claim using the claims coding shown.

A/C - Refrigerant Leaks At Connections

Infiniti G35x Sedan AWD V6-3.5L (VQ35DE) Technical Service Bulletin # 09-041 Date: 090925

A/C - Refrigerant Leaks At Connections

Classification: HA09-004

Reference: ITB09-041

376

Date: September 25, 2009

A/C SYSTEM O-RING SEAL LEAKS

APPLIED VEHICLES: All Infiniti vehicles with A/C system

IF YOU CONFIRM

A refrigerant leak at a refrigerant pipe/hose joint location,

NOTE:

Follow the leak detection information in the Service Manual to determine the source of refrigerant leaks.

ACTIONS

NOTE:

The O-ring seal is the most common cause of a refrigerant leak at an A/C joint.

1. Inspect the metal surfaces of the pipe/hose joint for damage or contamination.

NOTE:

Do not replace a refrigerant pipe, hose, or other A/C component if an o-ring seal will solve the leak incident, if it should occur.

2. If no damage is found to the joint metal surfaces, replace the O-ring seal.

CAUTION:

^ When replacing O-ring seals, use lint-free gloves,

^ Make sure no foreign material is introduced into the system when the joint is open.

^ Apply A/C oil to the O-ring before installation.

^ After recharging the system, recheck for leaks.

PARTS INFORMATION

Reference an electronic parts catalog (FAST or equivalent) for any needed parts.

CLAIMS INFORMATION

Reference the current Infiniti Warranty Flat Rate Manual and use the correct coding for repairs performed.

Body - Paint Staining Due to 'Tire Dressing'

Infiniti G35x Sedan AWD V6-3.5L (VQ35DE) Technical Service Bulletin # 05-003 Date: 050115

Body - Paint Staining Due to 'Tire Dressing'

Classification:

WT04-011

Reference:

ITB05-003

Date:

January 12, 2005

INFINITI; INFORMATION ON PAINT STAINS CAUSED BY TIRE DRESSING

APPLIED VEHICLES:

All 2000 and later Infiniti

SERVICE INFORMATION

An aftermarket chemical product called "tire dressing" is sometimes used on tires. When the tire dressing is applied it may combine with an

anti-ozonant compound (applied by tire manufacturers) to form a new compound that could stain vehicle paint. The paint stains occur if the wet tire

dressing/anti-ozonant compound slings onto the vehicle paint when the vehicle is driven.

Paint damage stains caused by application of the tire dressing are NOT covered by Nissan warranty. Therefore Nissan does not recommend the

application of tire dressing to vehicle tires.

If a customer requests application of tire dressing to his/her vehicle they should be informed that the vehicle paint may be stained if the tire dressing

is applied to the tires and that Nissan warranty does not cover the repair of these stains. If the customer still requests the tire dressing be applied

consider the following:

1. Water based tire dressing may reduce the amount of anti-ozonant that will be mixed/dissolved in the tire dressing compared with oil based

dressings.

2. A light coat of the tire dressing may reduce the amount of dressing that could enter the tires grooves/treads.

3. To reduce the amount of dressing that could stain the paint: Use a dry towel to wipe off excess tire dressing from the fire including grooves

and treads. Then allow the dressing to dry completely.

Electrical - MIL ON/DTC P0128 Due To Remote Start Sys.

Infiniti G35x Sedan AWD V6-3.5L (VQ35DE) Technical Service Bulletin # 10-039 Date: 100621

Electrical - MIL ON/DTC P0128 Due To Remote Start Sys.

Classification: EC10-018

Reference: ITB10-039

Date: June 21, 2010

MIL "ON" WITH DTC P0128 (THERMOSTAT FUNCTION) STORED

APPLIED VEHICLES: 2002 and later Infiniti vehicles

IF YOU CONFIRM

The MIL is "ON" with P0128 (Thermostat Function) stored.

ACTIONS

1. Check to see if an aftermarket remote starter system is installed.

^ Remote starter systems may cause the MIL to illuminate and DTC P0128 to store.

441

2. If a remote starter system is installed, remove/disconnect it before performing diagnostic procedures on the vehicle.

3. Refer to ASIST and the Electronic Service Manual (ESM) for diagnostic information.