2019 Infiniti M35 V6-3.5L (VQ35HR) Diagnostic and Repair Information Page 46
OK or NG
OK - GO TO 10.
NG - GO TO 11.
10.CHECK SWIVEL POSITION SENSOR SIGNAL CIRCUIT (SHORT CIRCUIT)
1. Turn ignition switch OFF.
2. Disconnect AFS control unit connector.
3. Check continuity between AFS control unit harness connector and ground.
OK or NG
OK - Replace front combination lamp RH (swivel position sensor malfunction). See: Lighting and Horns/Headlamp/Service and Repair/Active
AFS.
NG - Repair harness or connector.
11.CHECK SWIVEL POSITION SENSOR POWER SUPPLY CIRCUIT (SHORT CIRCUIT)
1. Turn ignition switch OFF.
2. Disconnect AFS control unit connector.
3. Check continuity between AFS control unit harness connector and ground.
OK or NG
OK - Replace AFS control unit. See: Lighting and Horns/Headlamp/Headlamp Alignment Control Module/Service and Repair.
NG - Repair harness or connector.
12.CHECK SWIVEL MOTOR
1. Turn ignition switch OFF.
2. Disconnect front combination lamp RH connector.
