2019 Infiniti M35 V6-3.5L (VQ35HR) Diagnostic and Repair Information Page 43
OK or NG
OK - GO TO 2.
NG -
- If voltage is less than approx. 0.25V, GO TO 3.
- If voltage is more than approx. 4.75V, GO TO 6.
2.CHECK SWIVEL POSITION SENSOR POWER SUPPLY
Check voltage between AFS control unit harness connector and ground.
OK or NG
OK - GO TO 12.
NG - Replace AFS control unit. See: Lighting and Horns/Headlamp/Headlamp Alignment Control Module/Service and Repair.
3.CHECK SWIVEL POSITION SENSOR POWER SUPPLY
Check voltage between AFS control unit harness connector and ground.
OK or NG
OK - GO TO 4.
NG - GO TO 8.
4.CHECK SWIVEL POSITION SENSOR POWER SUPPLY CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect front combination lamp RH connector.
3. Turn ignition switch ON.
