Saturday, December 1, 2018

Electrical - Electronic Component Damage Prevention

Disclaimer Infiniti G35x Sedan AWD V6-3.5L (VQ35DE) Technical Service Bulletin # 09-020 Date: 090406



Electrical - Electronic Component Damage Prevention



Classification: EL09-012



Reference: 09-020



366



Date: April 6, 2009



ELECTRONIC CONTROL UNIT DAMAGE CAN RESULT FROM IMPROPER BATTERY CONNECTION



APPLIED VEHICLES:



All Infiniti



SERVICE INFORMATION



^ The vehicle 12 volt battery is an important part of the vehicle electrical system and is required to stay connected when the engine is running.



^ To prevent damage to vehicle electronic components follow the instructions / cautions below.



IMPORTANT:



Damage to electronic components (ECM, TCM, BCM, etc.) due to improper battery connection will not be covered under warranty.



CAUTION:



^ Make sure the ignition is OFF during battery service and replacement.



^ Do not disconnect or connect any battery cables while the ignition switch is turned ON.



^ When disconnecting a battery, always disconnect the negative cable first.



^ When connecting a battery, always connect the positive cable first.



^ Do not leave a battery cable loose. Tighten battery cables immediately after attachment.



^ If a battery cable is loose, do not operate any electrical loads. (This includes turning the ignition ON, starting the engine, operating accessories



such as the A/C system, power seats, interior lights, exterior lights etc.).



^ When "jump starting" or "boosting" a battery - be careful. Don't accidentally reverse the polarity of the cables.