Interior/Restraints - Front Seat Trim Material Info.

Infiniti G35x Sedan AWD V6-3.5L (VQ35DE) Technical Service Bulletin # 00-031B Date: 110215

Interior/Restraints - Front Seat Trim Material Info.

Classification: RS00-004B

Reference: ITB00-031B

Date: February 15, 2011

RECOMMENDATION AGAINST MAKING CHANGES TO FRONT SEAT ASSEMBLY TRIM MATERIALS

This bulletin has been amended. The Applied Vehicles and Service Information have been updated. Discard all previous copies.

APPLIED VEHICLES: ALL INFINITI VEHICLES

SERVICE INFORMATION

Changes or modifications to the front seat assembly trim materials may affect the proper operation of the Front Seat-Mounted Side-Impact

Supplemental Air Bags and Passenger Occupant Classification Sensor and could result in serious personal injury or death.

Infiniti STRONGLY RECOMMENDS AGAINST making any change to seat trim materials from the factory equipped condition. This specifically

108

applies to replacing the seat trim with non-factory materials; adding leather/cloth seat covers seat pads or seat storage pouches etc. around or over

the seat back and the passenger seat cushion.

^ Damage or failure due to changes or modifications to the front seat assembly are not covered under the warranty.

^ Damage or failure due to changes or modifications to the front seat assembly are not subject to indemnification under the Infiniti Dealer Sales and

Service Agreement.

^ Dealers may be obligated under their Infiniti Dealer Sales and Service Agreement to indemnify Infiniti for any damages, injures or deaths caused

by modification of the front seat assemblies.

^ IFS will not provide retail advance for any changes to the front seat trim materials from factory equipped condition.

^ Vehicles with any changes to the front seat trim materials from factory equipped condition may not be eligible for the Signature PURCHASE

Plan.

SEE Section 1 of the applicable Owner's Manual for important Warnings and other information about Front Seat-Mounted Side-Impact

Supplemental Air Bags and Passenger Occupant Classification Sensor.

Body - Removing Foreign Material From The Windshield

Disclaimer Infiniti G35x Sedan AWD V6-3.5L (VQ35DE) Technical Service Bulletin # 13-007 Date: 130322

Body - Removing Foreign Material From The Windshield

Classification: BT13-007

Reference: ITB13-007

Date: March 22, 2013

REMOVING FOREIGN MATERIAL FROM THE WINDSHIELD

APPLIED VEHICLES: All Infiniti

SERVICE INFORMATION

Windshield "foreign material" that is on the surface of the glass in some cases can be cleaned off with a very particular type and grade of steel wool.

^ Most any foreign material on the surface of the Windshield can be cleaned off by using #0000 super fine steel wool.

> The #0000 grade super fine steel wool can be found in most hardware stores.

^ In most cases the glass cannot be damaged by manually rubbing (no power tools) too hard or too much and it is recommended not to use any

cleaners with the steel wool.

Use new steel wool from an un-opened bag and store unused portion in a re-sealable container to prevent contamination.

455

^ Do not use dirty or contaminated steel wool. Dirty or contaminated steel wool will scratch the glass. If the steel wool is dropped on the floor get a

new piece of steel wool to clean the windshield.

^ Clean (then dry) windshield first with soap and water to remove any abrasive dirt or grit that may be present before using steel wool.

NOTE:

Always try and clean any windshield surface issue first with #0000 grade super fine steel wool before glass replacement is considered.

CLAIMS INFORMATION

Foreign material on the windshield surface is not a warrantable condition.

Materials used to clean the windshield, such as the steel wool mentioned above, are considered a shop supply.