Showing posts with label ComputersControls. Show all posts
Showing posts with label ComputersControls. Show all posts

Friday, November 30, 2018

Computers/Controls - Reprogramming Utilizing CONSULT(R)

Infiniti G35x Sedan AWD V6-3.5L (VQ35DE) Technical Service Bulletin # 11-049A Date: 110818



Computers/Controls - Reprogramming Utilizing CONSULT(R)



Classification: EC11-022A



Reference: ITB11-049A



Date: August 18, 2011



REPROGRAMMING WITH CONSULT



This bulletin has been amended. The statements below have changed. No other changes have been made. Please discard any previous copies.



APPLIED VEHICLES: All Infiniti vehicles with a reprogrammable ECU



SERVICE INFORMATION



If you have a reprogram that requires the use of CONSULT-II (C-II) and C-II is not available:



^ Refer to the chart below to determine CONSULT applicability.



CURRENT REPROGRAMMING APPLICABILITY CHART



Reprogramming C-II Loaner Program



(Available ONLY for reprogramming use)



^ Contact TECH LINE and they will determine if a C-II Loaner is needed. If so they will make arrangements for the loaner to be shipped.



^ Dealerships must return the C-II Loaner immediately after the reprogramming is completed.



^ If the Loaner is not returned within one week of delivery your FOM will be contacted to collect the unit.

Tuesday, November 27, 2018

Computers/Controls - CONSULT III PLUS(R) Saved Data List

Infiniti G35x Sedan AWD V6-3.5L (VQ35DE) Technical Service Bulletin # 12-057 Date: 120912



Computers/Controls - CONSULT III PLUS(R) Saved Data List



Classification: EC12-022



Reference: ITB12-057



Date: September 12, 2012



24



SAVED DATA LIST REPROGRAMMING WITH CONSULT III PLUS



SERVICE INFORMATION



^ When performing a "Reprogramming" operation with C-III plus, the screen in Figure 1 may display.



^ This screen displays "Saved Data" from previous C-III plus operations.



^



During the initial "Reprogramming Confirmation" set-up, if you get this screen:



1. Select Delete, then



2. Select Other Operation, then



3. Continue with the reprogramming procedure.



NOTE:



If reprogramming does not complete, this screen can display for reprogramming recovery. Do not select Delete if this screen displays



during reprogram recovery.