2019 Infiniti M35 V6-3.5L (VQ35HR) Diagnostic and Repair Information Page 377
8.CHECK INTERMITTENT INCIDENT
See: Powertrain Management/Computers and Control Systems/Testing and Inspection/Initial Inspection and Diagnostic Overview/Trouble
Diagnosis For Intermittent Incident/Description.
- INSPECTION END
Component Inspection
1.CHECK FUEL TANK TEMPERATURE SENSOR
1. Turn ignition switch OFF.
2. Disconnect "fuel level sensor unit and fuel pump (main)" harness connector.
3. Remove "fuel level sensor unit and fuel pump (main)".
4. Check resistance between "fuel level sensor unit and fuel pump
(main)" terminals by heating with hot water as shown in the figure.
Is the inspection result normal?
YES - INSPECTION END
NO - Replace "fuel level sensor unit and fuel pump (main)".
P0196
P0196 EOT SENSOR
Description
The engine oil temperature sensor is used to detect the engine oil temperature. The sensor modifies a voltage signal from the ECM.
The modified signal returns to the ECM as the engine oil temperature input. The sensor uses a thermistor which is sensitive to the change in
temperature. The electrical resistance of the thermistor decreases as temperature increases.
