2019 Infiniti M35 V6-3.5L (VQ35HR) Diagnostic and Repair Information Page 82
SELF-DIAGNOSTIC LOGIC
DIAGNOSTIC PROCEDURE
1.CHECK BATTERY
Measure the battery output voltage. Make sure that it is 9V or more.
OK or NG
OK - GO TO 2.
NG - Charge or replace the battery.
2.CHECK POWER SUPPLY CIRCUIT
1. Turn ignition switch OFF.
2. Check voltage between Intelligent Key unit connector and ground.
OK or NG
OK - Check the condition of harness and connector. If it is
OK, check the self-diagnosis results using CONSULT-III again.
NG - Check the following.
- 10A fuse [No.22, located in the fuse block (J/B)]
- Harness for open or short between fuse block and
