2019 Infiniti M35 V6-3.5L (VQ35HR) Diagnostic and Repair Information Page 37
4. Check continuity between Intelligent Key unit connector and ground.
OK or NG
OK - Check the condition of harness and connector. If it is OK, check the self-diagnosis results using
CONSULT-III again.
NG - Repair or replace harness.
B2192
IVIS (INFINITI VEHICLE IMMOBILIZER SYSTEM-NATS)
B2192 ID DISCORD, BCM-ECM
Self-diagnostic results:
"ID DISCORD, BCM-ECM" displayed on CONSULT-III screen
1.CONFIRM SELF-DIAGNOSTIC RESULTS
Confirm SELF-DIAGNOSTIC RESULTS "ID DISCORD BCM-ECM" displayed on CONSULT-III screen.
NOTE:
"ID DISCORD IMM-ECM":
Registered ID of BCM is in discord with that of ECM.
Is CONSULT-III screen displayed?
Yes - GO TO 2.
No - See: Accessories and Optional Equipment/Antitheft and Alarm Systems/Testing and Inspection/Scan Tool Testing and Procedures/IVIS
(Infiniti Vehicle Immobilizer System-NATS)/CONSULT-III Functions (BCM-IMMU).
2.PERFORM INITIALIZATION WITH CONSULT-III
Perform initialization with CONSULT-III. Re-register all NATS ignition key IDs.
For initialization, refer to "CONSULT-III Operation Manual NATS-IVIS/NVIS".
NOTE:
If the initialization is not completed or malfunctions, CONSULT-III shows message on the screen.
Can the system be initialized?
Yes - ?Start engine. (END)
- (System initialization had not been completed.)
No - ECM is malfunctioning.
- Replace ECM.
- Perform initialization with CONSULT-III
For initialization, refer to "CONSULT-III Operation Manual NATS-IVIS/NVIS"
B2193
IVIS (INFINITI VEHICLE IMMOBILIZER SYSTEM-NATS)
B2193 CHAIN OF BCM-ECM
Self-diagnostic results:
"CHAIN OF BCM-ECM" displayed on CONSULT-III screen
