2019 Infiniti M35 V6-3.5L (VQ35HR) Diagnostic and Repair Information Page 51
3. Check continuity between AFS control unit harness connector
(A) and front combination lamp LH harness connector (B).
OK or NG
OK - Replace front combination lamp LH (swivel position sensor malfunction). See: Lighting and Horns/Testing and Inspection/Symptom
Related Diagnostic Procedures/AFS Off Indicator Does Not Operate See: Sensors and Switches/Sensors and Switches - Steering and
Suspension/Sensors and Switches - Steering/Steering Angle Sensor/Service and Repair/Active AFS See: Lighting and Horns/Headlamp/Service
and Repair/Active AFS See: Lighting and Horns/Headlamp/Headlamp Alignment Control Module/Service and Repair, "Removal and Instal-
lation of Front Combination Lamp".
NG - Repair harness or connector.
6.CHECK SWIVEL POSITION SENSOR GROUND
Check voltage between AFS control unit harness connector and ground.
OK or NG
OK - GO TO 7.
NG - Check connector for connection, bend and loose fit. If it is normal, replace AFS control unit. See: Lighting and Horns/Headlamp/Headlamp
Alignment Control Module/Service and Repair.
7.CHECK SWIVEL POSITION SENSOR GROUND CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect AFS control unit connector and front combination lamp LH connector.
