2019 Infiniti M35 V6-3.5L (VQ35HR) Diagnostic and Repair Information Page 657
3. Check the voltage between battery current sensor harness connector and ground.
Is the inspection result normal?
YES - GO TO 9.
NO - GO TO 3.
3.CHECK BATTERY CURRENT SENSOR POWER SUPPLY CIRCUIT-II
1. Turn ignition switch OFF.
2. Disconnect ECM harness connector.
3. Check the continuity between battery current sensor harness connector and ECM harness connector.
Is the inspection result normal?
YES - GO TO 5.
NO - GO TO 4.
4.DETECT MALFUNCTIONING PART
Check the following.
- Harness connectors E10, F1
- Harness for open between battery current sensor and ECM
- Repair open circuit.
5.CHECK SENSOR POWER SUPPLY CIRCUIT
Check harness for short to power and short to ground, between the following terminals.
Is the inspection result normal?
YES - GO TO 6.
NO - Repair short to ground or short to power in harness or connectors.
6.CHECK COMPONENTS
Check the following.
- CKP sensor ( See: P Code Charts/P0335.)
- CMP sensor (bank 2) ( See: P Code Charts/P0340.)
- EVT control position sensor (bank 2) ( See: P Code Charts/P1078.)
- EVAP control system pressure sensor ( See: P Code Charts/P0451.)
- Refrigerant pressure sensor ( See: Heating and Air Conditioning/Testing and Inspection/Component Tests and General Diagnostics/Magnet
Clutch Circuit.)
Is the inspection result normal?
