2019 Infiniti M35 V6-3.5L (VQ35HR) Diagnostic and Repair Information Page 720
CAUTION:
Always drive vehicle at a safe speed.
NOTE:
If "DTC Confirmation Procedure" has been previously performed, always turn ignition switch OFF and wait at least 10 seconds before
performing the next test.
After the repair, perform the following procedure to confirm the malfunction is eliminated.
WITH CONSULT-III
1. Start the engine.
2. Select "DATA MONITOR" in "TRANSMISSION".
3. Move selector lever to "M" position.
4. Drive vehicle and maintain the following conditions for at least 2 consecutive seconds.
MANU MODE SW: ON
5. If DTC is detected, go to See: P Code Charts/P1815/5AT RE5R05A.
Wiring Diagram - AT - MMSW
