2019 Infiniti M35 V6-3.5L (VQ35HR) Diagnostic and Repair Information Page 93
With CONSULT-III
1. Perform "ENGINE" self-diagnosis. See: Diagnostic Trouble Code Descriptions/DTC Index/EC (for VQ35HR) or , "CONSULT-III
Function" (for VK45DE).
2. Check if malfunction is indicated.
Is malfunction indicated?
YES - 1. Repair or replace applicable item.
2. Erase DTC and perform ICC system running test. Then perform self-diagnosis of ICC system again.
NO - 1. Replace ICC sensor integrated unit, and adjust laser beam aiming.
2. Erase DTC and perform ICC system running test. Then perform self-diagnosis of ICC system again.
11.CHECK STOP LAMP SWITCH INSTALLATION AND ADJUSTMENT
Check stop lamp switch for proper installation, and adjust the switch if necessary. See: Brakes and Traction Control/Brake Pedal Assy/Service
and Repair/Inspection and Adjustment See: Brakes and Traction Control/Brake Pedal Assy/Service and Repair/Removal and Installation.
OK or NG
OK - GO TO 12.
NG - 1. Adjust stop lamp switch.
2. Erase DTC and perform ICC system running test. Then perform self-diagnosis of ICC system again.
12.CHECK STOP LAMP SWITCH
Check stop lamp switch. See: Cruise Control/Testing and Inspection/Component Tests and General Diagnostics/ICC Brake Switch and Stop
Lamp Switch.
OK or NG
OK - GO TO 13.
NG - 1. Replace stop lamp switch.
2. Erase DTC and perform ICC system running test. Then perform self-diagnosis of ICC system again.
13.CHECK STOP LAMP SWITCH POWER SUPPLY CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect stop lamp switch connector.
3. Turn ignition switch ON.
4. Check voltage between stop lamp switch harness connector and ground.
OK or NG
OK - GO TO 14.
NG - 1. Repair or replace harness or fuse.
2. Erase DTC and perform ICC system running test. Then perform self-diagnosis of ICC system again.
14.CHECK HARNESS BETWEEN STOP LAMP SWITCH AND ABS ACTUATOR AND ELECTRIC UNIT
(CONTROL UNIT)
1. Turn ignition switch OFF.
2. Disconnect ABS actuator and electric unit (control unit) connector.
