2019 Infiniti M35 V6-3.5L (VQ35HR) Diagnostic and Repair Information Page 755
Is the inspection result normal?
YES - GO TO 13.
NO - Replace malfunctioning component.
7.CHECK APP SENSOR 2 GROUND CIRCUIT FOR OPEN AND SHORT
1. Turn ignition switch OFF.
2. Disconnect ECM harness connector.
3. Check the continuity between APP sensor harness connector and ECM harness connector.
4. Also check harness for short to ground and short to power.
Is the inspection result normal?
YES - GO TO 9.
NO - GO TO 8.
8.DETECT MALFUNCTIONING PART
Check the following.
- Harness connectors E108, M15
- Harness for open or short between ECM and APP sensor
- Repair open circuit, short to ground or short to power in harness or connectors.
9.CHECK APP SENSOR 2 INPUT SIGNAL CIRCUIT FOR OPEN AND SHORT
1. Check the continuity between APP sensor harness connector and ECM harness connector.
2. Also check harness for short to ground and short to power.
Is the inspection result normal?
YES - GO TO 11.
NO - GO TO 10.
10.DETECT MALFUNCTIONING PART
Check the following.
- Harness connectors E108, M15
- Harness for open or short between ECM and accelerator pedal position sensor
- Repair open circuit, short to ground or short to power in harness or connectors.
11.CHECK APP SENSOR
See: P Code Charts/P2127.
Is the inspection result normal?
YES - GO TO 13.
NO - GO TO 12.
12.REPLACE ACCELERATOR PEDAL ASSEMBLY
1. Replace accelerator pedal assembly.
2. Go to See: P Code Charts/P2127.
- INSPECTION END
13.CHECK INTERMITTENT INCIDENT
See: Powertrain Management/Computers and Control Systems/Testing and Inspection/Initial Inspection and Diagnostic Overview/Trouble
Diagnosis For Intermittent Incident/Description.
- INSPECTION END
Component Inspection
1.CHECK ACCELERATOR PEDAL POSITION (APP) SENSOR
1. Turn ignition switch OFF.
2. Reconnect all harness connectors disconnected.
3. Turn ignition switch ON.
