Disclaimer Infiniti G35x Sedan AWD V6-3.5L (VQ35DE) Technical Service Bulletin # 06-019 Date: 061011
Audio System - Satellite Radio Antenna Installation
Classification:
EL06-013
Reference:
ITB06-019
Date:
October 11, 2006
2003-2007 G35; SATELLITE RADIO ANTENNA INSTALLATION TIPS
307
APPLIED VEHICLES:
2003 - 2007 G35 Sedan and Coupe
SERVICE INFORMATION
The service information provided here only clarifies the most critical areas in the Satellite Radio antenna installation instructions for accessory
(dealer installed) Satellite Radio.
Carefully follow the complete antenna installation instructions provided with the antenna kit or the installation instructions available in the NNA
Dealer Portal.
Critical Steps for Antenna Installation
^ Ambient temperature must be above 20锟斤拷C (68锟斤拷 F). If not, tape and mating surface must be heated to at least 20锟斤拷C (68锟斤拷 F).
^ Make sure technician hands, gloves, or anything that comes into contact with the feeder cover or mating surface is clean and free from
contaminants.
^ Mating surface must be free of contaminants and cleaned with 50/50 isopropyl alcohol / water solution.
^ Apply adhesion promoter to the glass surface per the installation instructions.
^ Do not contaminate the tape surface or mating surface prior to installation.
^ Be aware the feeder cover will stick instantly to the prepared and primed surface and CANNOT be repositioned. Feeder cover alignment and
positioning must be DONE prior to attachment.
^ Apply smooth and even pressure on the feeder cover to ensure 100% wet-out.
^ Keep the vehicle inside in a warm area (above 20锟斤拷C or 68锟斤拷 F) for at least an hour after installation to help promote initial curing of the tape.
^ Advise the customer to avoid any activity which would impose pressure on the feeder cover (such as a car wash) within the first 48 hours.
