2019 Infiniti M35 V6-3.5L (VQ35HR) Diagnostic and Repair Information Page 78
2. Disconnect Intelligent Key unit and A/T shift selector connector.
3. Check continuity between Intelligent Key unit connector and A/T shift selector connector.
4. Check continuity between Intelligent Key unit connector and ground.
OK or NG
OK - GO TO 3.
NG - Repair or replace harness.
3.CHECK A/T SHIFT SELECTOR
Check A/T shift selector.
OK or NG
OK - Check the condition of harness and connector. If it is
OK, check the self-diagnosis results using CONSULT-III again.
NG - Replace A/T shift selector.
