2019 Infiniti M35 V6-3.5L (VQ35HR) Diagnostic and Repair Information Page 701
3. If OK, check harness for short to ground and short to power.
OK or NG
OK - GO TO 7.
NG - Replace open circuit or short to ground and short to power in harness or connectors.
7.CHECK TCM POWER SUPPLY AND GROUND CIRCUIT
1. Check TCM power supply and ground circuit. See: Diagrams/Electrical Diagrams/Transmission Control Systems/5AT RE5R05A/Main
Power Supply and Ground Circuit.
2. Reinstall any part removed.
OK or NG
OK - Replace the control valve with TCM. See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Valve Body/Service and Repair.
NG - Repair or replace damaged parts.
8.CHECK DTC
Perform See: P Code Charts/P1710.
OK or NG
OK - INSPECTION END
NG - GO TO 1.
Component Inspection
A/T FLUID TEMPERATURE SENSOR 1
1. Remove control valve with TCM. See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Valve Body/Service and Repair.
2. Check resistance between transmission range switch connector
(A) terminals.
3. If NG, replace the control valve with TCM. Refer to See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Valve
Body/Service and Repair, "Control Valve with TCM and A/T Fluid Temperature Sensor 2".
A/T FLUID TEMPERATURE SENSOR 2
1. Remove A/T fluid temperature sensor 2. See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Valve Body/Service and
Repair.
2. Check resistance between terminals.