2019 Infiniti M35 V6-3.5L (VQ35HR) Diagnostic and Repair Information Page 836
Is the inspection result normal?
YES - INSPECTION END
NO - Replace front display unit.
WITH NAVIGATION : Description
WITH NAVIGATION : DTC Logic
WITH NAVIGATION : Diagnosis Procedure
1.CHECK FRONT DISPLAY UNIT POWER SUPPLY AND GROUND CIRCUIT
Check front display unit power supply and ground circuits. See: Accessories and Optional Equipment/Collision Avoidance and Parking Assist
Systems/Testing and Inspection/Component Tests and General Diagnostics/Power Supply and Ground Circuit/Front Display Unit/Without Mobile
Entertainment System.
Is the inspection result normal?
YES - GO TO 2.
NO - Repair malfunctioning parts.
2.CHECK CONTINUITY COMMUNICATION CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect front display unit connector and AV control unit connector.
3. Check continuity between front display unit harness connector terminals 11, 22 and AV control unit harness connector terminals 102, 103.
11 - 102: Continuity should exist.
22 - 103: Continuity should exist.
4. Check continuity between front display unit harness connector terminals 11, 22 and ground.
11, 22 - Ground: Continuity should not exist.
Is the inspection result normal?
YES - GO TO 3.
NO - Repair harness or connector.
3.CHECK SERIAL COMMUNICATION SIGNAL
1. Connect front display unit connector and AV control unit connector.
2. Turn ignition switch ON.
3. Check signal between front display unit harness connector terminal 11 and ground.
