2019 Infiniti M35 V6-3.5L (VQ35HR) Diagnostic and Repair Information Page 44
4. Check voltage between front combination lamp RH harness connector and ground.
OK or NG
OK - GO TO 5.
NG - Repair harness or connector.
5.CHECK SWIVEL POSITION SENSOR SIGNAL CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect AFS control unit connector.
3. Check continuity between AFS control unit harness connector
(A) and front combination lamp RH harness connector (B).
OK or NG
OK - Replace front combination lamp RH (swivel position sensor malfunction). See: Lighting and Horns/Testing and Inspection/Symptom
Related Diagnostic Procedures/AFS Off Indicator Does Not Operate See: Sensors and Switches/Sensors and Switches - Steering and
Suspension/Sensors and Switches - Steering/Steering Angle Sensor/Service and Repair/Active AFS See: Lighting and Horns/Headlamp/Service
and Repair/Active AFS See: Lighting and Horns/Headlamp/Headlamp Alignment Control Module/Service and Repair, "Removal and
Installation of Front Combination Lamp".
NG - Repair harness or connector.
6.CHECK SWIVEL POSITION SENSOR GROUND
