2019 Infiniti M35 V6-3.5L (VQ35HR) Diagnostic and Repair Information Page 99
Check continuity between ICC brake hold relay harness connector and ground.
OK or NG
OK - GO TO 13.
NG - 1. Repair or replace harness between ICC brake hold relay and ground.
2. Erase DTC and perform ICC system running test.
Then perform self-diagnosis of ICC system again.
13.CHECK ICC SENSOR INTEGRATED UNIT STANDARD VOLTAGE
With CONSULT-III
1. Connect ICC sensor integrated unit connector.
2. Turn ignition switch ON.
3. Perform "Active Test" ("STOP LAMP": "STP LMP DRIVE ON") with CONSULT-III, check voltage between ICC brake hold relay harness
connector and ground.
OK or NG
OK - GO TO 14.
NG - 1. Replace ICC sensor integrated unit, and adjust laser beam aiming.
2. Erase DTC and perform ICC system running test. Then perform self-diagnosis of ICC system again.
14.CHECK ICC BRAKE HOLD RELAY POWER SUPPLY CIRCUIT
1. Turn ignition switch ON.
2. Check voltage between ICC brake hold relay harness connector and ground.
